The MCC1 Media Gateway - Overview

A MCC1 Media Gateway can be used as a Port Network (PN) cabinet. Doors on the front and rear of the MCC1 Media Gateway protect the internal equipment and allow easy access to the circuit packs. Each MCC1 Media Gateway contains casters. Levelling feet keep the cabinet from rolling. Each corner of a MCC1 Media Gateway can bolt to the floor, if required.

The MCC1 Media Gateway can contain up to five carriers. The MCC1 Media Gateway uses circuit packs. Doors on the front and on the rear of the cabinet protect internal equipment and allow easy access to circuit packs.

 

The MCC1 Media Gateway can contain the following carriers:

· A Port Carrier can that contains one or more of the following:
  o Port circuit packs
  o IPSI
  o VoIP conversion resources
  o Service circuit packs
  o Tone clocks
  o Expansion Interface (EI) circuit packs
· A Switch Node Carrier that contains Switch Node Interface
  circuit packs that compose the centre Stage Switch (CSS).
· An Expansion Control Carrier that contains service slots and port
  slots.